Groove & Tongue Flanges

The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it’s face.

Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.

Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.

General flange faces such as the RTJ, T&G and the F&M shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.

Tongue and Groove flange

We are a government approved largest Manufacturer, Supplier and Exporter of ASME 16.5 Groove & Tongue Flanges. Groove & Tongue Flanges facings are standardized in both large and small types. we can provide Groove & Tongue Flanges in all material Carbon Steel & Stainless Steel in all Size & Dimensions. These are commonly found on pump covers and Valve Bonnets. Groove and Tongue Flanges are available in following specifications:

Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS ASA 150#, 2.0MPa, 5.0MPa, 10.0MPa,
Flange Facings Raised Face Flanges, Ring Type Joint Flanges, Large Tongue & Groove Flanges, Small Tongue & Groove Flanges.
Carbon Steel Groove & Tongue Flanges A105, C22.8
Stainless Steel Groove & Tongue Flanges A182 F304/L, F310, F316/L, F321/H, F347/H, F410, F440, 904L
Alloy Steel Groove & Tongue Flanges A182 F1, F5, F9, F11, F12, F22, F91
Alloy Steel Groove & Tongue Flanges Alloy 20, Alloy C22, Alloy C276, Alloy B2
Nickel Alloy Groove & Tongue Flanges ASTM / ASME SB 564 UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), ASTM / ASME SB 160 UNS 2201 (NICKEL 201 ), ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)
Tongue and groove flanges per ANSI B16.21 pressure rationg Classes 150-1500 lbs
Leading manufacturer of Groove & Tongue Flanges

We also having stock of Groove & Tongue Flanges & other Stainless Steel Flanges, Carbon Steel Flanges, Alloy Steel Flanges manufactured by :